User Manual

Chapter 11: Network settings
76 TruVision NVR 22 (S/P) User Manual
Option Description
7.
IPv4
Subnet Mask Enter the subnet mask for your network so the recorder
will be recognized
within the network.
Default value is 255.255.255.0.
8.
IPv4 Default
G
ateway
Enter the IP address of your network gateway so the recorder will be
recognized within the network. This is typically the IP address of your
router. Consult your router user manual or contact your ISP to get the
required information on your gateway.
Default value is 192.168.1.1.
9.
MAC Address
Displays the MAC address.
The MAC address is a unique identifier of your
recorder and it cannot be changed.
10.
Preferred DNS
Server
Enter the preferred domain name server to use with the recorder. It must
match the DNS server information of your router. Check your router’s
browser interface or contact your ISP for the information.
11.
Server Port
Use the server port for remote client software access. The port range is
between 1024 and 65535.
Enter the server port value. The default value is 8000.
12.
Multicast IP
Enter a D-class IP address between 224.0.0.0 to 239.255.255.255. Only
specify this option if you are using the multicast function. Some routers
prohibit the use of multicast function in case of a network storm.
13.
IPv6 A
ddress 1 Enter the IPv6 address for the recorder.
Default value is fe80::240:30ff:fe48:2975/64.
14.
IPv6 A
ddress 2 Enter the IPv6 address for the recorder.
15.
IPv6 Default
G
ateway
Enter the IPv6 address of your network gateway so the recorder will be
recognized within the network. This is typically the IP address of your
router.
16.
MTU (B
ytes) Enter a value between 500 and 9676. Default is 1500.
17.
Alternate DNS
Server
Enter the alternate domain name server to use with the recorder.
18.
HTTP Port
By default the HTTP port value is 80.
19.
RTSP Service
The RTSP (Real Time Streaming Protocol) is a network control protocol
designed for use in entertainment and communications systems to control
streaming media servers. The default value is 554.
20.
Outgoing
Bandwidth
Limit
(Kbps)
Outgoing Bandwidth. The default value is 81920.
3. Click Apply to save the settings and Exit to return to live view.
PPPoE settings
Although not usually used, you can connect the recorder directly to a DSL modem. To
do this, you need to select the PPPoE option in the network settings. Contact your ISP
to get the user name and password.