User Manual

Chapter 11: Network settings
TruVision NVR 22 (S/P) User Manual 79
To set up an NTP server:
1. From the menu toolbar, click Network Settings > NTP.
2. Check the NTP box to enable feature. It is disabled by default.
3. Enter the NTP settings:
• Interval (min): Time in minutes to synchronize with the NTP server. The value
can be between 1 and 10080 minutes. Default is 60 minutes.
• NTP Server: IP address of the NTP server. Default is time.nist.gov.
• NTP Port: Port of the NTP server. Default is 123.
4. Click Apply to save the settings and click Exit to return to live view.
Email settings
The recorder can send email notifications of alarms or notifications through the network.
Note: Ensure that the DNS address has been set up correctly beforehand.
To configure email settings:
1. From the menu toolbar, click Network Settings > Email.
2. Enter the required settings.
Option
Description
E
nable Server
Authentication
Check the box if your mail server requires authentication and enter the
login user name and password.
User Name
If the mail server requires authentication, enter the login user name.
Password
If the mail server requires authentication, enter the login password.
SMTP S
erver Enter the SMTP server’s IP address.
SMTP Port
Enter the SMTP port. The default TCP/IP port for SMTP is 25.
Enable SSL
/TLS Check the box to enable SSL/TLS if it is required by the SMTP server.
This feature is optional.
Sender
Enter the name of the sender of the email.
Sender’s Address
Enter the sender’s email address.
Select Receiver
Select an email recipient. Up to three receivers can be selected.
Receiver
Enter the name of the receiver of the email.
Receiver’s Address
Enter the email address of the receiver.
Include Snapshot
Check the Attach JPEG File box if you want to send an email with
attached alarm images.
Interval
Select an interval range in the Interval box.
The interval range represents the time range in between the alarm
images being sent. For example, if you set the interval range at two
seconds, the second alarm image will be sent two seconds after the
first alarm image