User Manual

Chapter 12: Recording
90 TruVision NVR 22 (S/P) User Manual
Figure 26: SD card image recording in playback
Prior to setting up the SD recording function, the SD card must be installed and
initialized (formatted) in the camera. No further setup is required in the camera as the
recorder takes control of the camera.
To set up SD card recording:
1. Go to the Configuration menu of the browser.
2. In Camera Setup, add the desired camera (correct password and login).
3. Click Recording > Recording Schedule.
4. Select the desired camera.
5. Check Enable Recording (eventual set time schedule, if desired).
6. Click the Advanced button to open the Advanced menu.
7. Check Enable EFR (Edge Failover Recording).
When a camera is offline, it will record on its own SD card. This video will then be
synchronized to the recorder HDD when the camera becomes online again.
8. Click OK to return to the “Recording Schedule” menu.
9. Click Save to save the changes and return to live view.