User Manual

3BChapter 4: Operating instructions
TruVision NVR 71 User Manual 15
Figure 3: TVN 71 front panel
The controls on the front panel include:
Table 1: Front Panel Elements
Name Description
1
. Status LEDs Power: A steady GREEN light indicates that the recorder is operating
correctly. A RED light indicates a fault.
Event Alarm: A blinking RED light indicates that there is a sensor Alarm
In or another alarm such as motion or tampering. No light indicates no
alarm.
HDD: A blinking RED light indicates that the recorder is accessing the
HDD in a read or write operation. A steady RED light indicates HDD
failure. No light indicates that the unit is in idle state.
Network: A GREEN light indicates a normal network connection. A
blinking RED light indicates a normal network connection when not all of
the eight network ports are in multi-address mode. No light indicates that
the recorder is not connected to any network.
Technical Alarm: A steady RED light indicates that there is a technical
alarm from the recorder. No light indicates that there is no alarm.
2
. Front panel lock You can lock or unlock the front panel with a key. It provides access to the
HDDs.
3
. Export log button Export log button: Insert a USB stick into one of the front panel USD ports.
Press the button to export the log file of the recorder for all channels (format
.txt). The download file has the log information for the past 24 hours from when
you press the button. The name format is YYYYMMDDHHMM.txt.
Note: You cannot export files to a USB CD/DVD burner using this button.
However, you can use a USD stick.
4
. USB 3.0 port There are two USB ports. They can be used for archiving video (setup via the
webpage), upgrading the firmware, or exporting the log file (via the front panel
button).
Access the web browser
To access the recorder, open the web browser and enter the IP address or domain name
assigned to the recorder. On the logon window, enter the user name and password.