User Manual
Table Of Contents
- Important information
- Chapter 1 Product introduction
- Chapter 2 Physical installation
- Chapter 3 Getting started
- Chapter 4 Operating instructions
- Chapter 5 Live view
- Chapter 6 Playback functionality
- Chapter 7 Searching files
- Chapter 8 Archiving files
- Chapter 9 Web browser configuration
- Chapter 10 Camera setup
- Chapter 11 Network settings
- Chapter 12 Recording
- Chapter 13 Alarm and event setup
- Chapter 14 Device management
- Chapter 15 Storage management
- Chapter 16 User management
- Chapter 17 System information
- Appendix A Specifications
- Appendix B Port forwarding information
- Appendix C TruVision Mac Safari browser plug-in v3.0
- Appendix D Guidelines when using high camera count (>32 cameras)
- Appendix E Default menu settings
- Index
3BChapter 4: Operating instructions
16 TruVision NVR 71 User Manual
The default values for recorder network settings are:
• IP address - 192.168.1.82
• Subnet mask - 255.255.255.0
• Gateway address - 192.168.1.1
• Server port: 8000
• Ports:
When using the browser:
RTSP port: 554
HTTP port: 80
When using TruNav:
RTSP port: 554
Server/Client software port: 8000
For more information on port forwarding, see Appendix B “Port forwarding information” on page
115.
Web browser interface
The recorder’s web browser interface has an intuitive structure that allows you to configure the
unit’s parameters quickly and efficiently. Each submenu item displays a setup menu that lets
you edit a group of settings. Most menus are available only to system administrators.
The browser window is divided into three sections. The currently selected submenu is
highlighted in green. See Figure 4 below.
Figure 4: Browser window
1. Menu toolbar: Setup options available for the selected menu function. Move the mouse over a menu
function and click to select it. There are four menu modes: Live View, Playback, Log Search, and
Configuration.