User Manual

4BChapter 5: Live view
TruVision NVR 71 User Manual 23
To call up a preset:
1. In live view, select the desired camera from the camera list.
2. Click the Preset button at the bottom of the PTZ panel to list all the presets.
3. Click the desired preset from the Preset list in the PTZ panel and click the button to call
up the preset. The camera immediately jumps to the preset position.
Preset tours
Preset tours are a series of presets. You can set up to eight preset tours for a camera.
Preset tours are saved on the camera and not on the recorder.
Figure 7: Preset tour interface
Run the preset tour Stop the preset tour Delete the preset tour
Set the preset tour
Add a preset Delete the preset Move the selected preset up
or down to the next row
To call up a preset tour:
1. In live view, select the desired camera from the camera list.
2. Click the Preset Tour button at the bottom of the PTZ panel to list all the preset tours.
3. Click the desired preset tour from the Preset Tour list in the PTZ panel and click the run
button to start the tour. The camera immediately moves through the preset tour.
To add a preset tour:
1. In live view, select the desired camera from the camera list.
2. Click the Preset Tour button at the bottom of the PTZ panel.
3. Select a preset tour from the list and click to set a preset tour.
4. Click to add a preset. The Step window appears. Select the preset number and enter the
speed and dwell time (Time) in seconds of the preset.
Note: A preset tour should have at least two presets.
5. Repeat step 4 to add other presets to the preset tour.
6. Click OK to save the settings. The tour appears in the list.