User Manual

4BChapter 5: Live view
24 TruVision NVR 71 User Manual
Shadow tours
Shadow tours allow you to record the manual movement of a PTZ and follow the same tour at a
later date. You can set up to eight shadow tours for a camera.
Shadow tours are saved on the camera and not on the recorder.
Figure 8: Shadow tour interface
Run the shadow tour Start recording Delete the shadow tour
Stop the shadow tour Stop recording
To call up a shadow tour:
1. In live view, select the desired camera from the camera list.
2. Click the Shadow Tour button at the bottom of the PTZ panel to list all the shadow tours.
3. Select the desired shadow tour and click the run button. The camera immediately carries
out the shadow tour movement. Click the stop button to stop the tour.
To set up a shadow tour:
1. In live view, select the desired camera from the camera list.
2. Click the Shadow Tour button at the bottom of the PTZ panel to list all the shadow tours.
3. Click the record button and, using the PTZ directional buttons, move the camera to follow
the desired path. Click the save button to save the tour.
Note: A shadow tour can be overwritten.