User Manual

5BChapter 6: Playback functionality
28 TruVision NVR 71 User Manual
Description
Backup: Click to make back up of recorded files to save locally on the recorder. A list of the
recorded files appears
Audio: Drag the scroll bar to the desired audio level.
Bookmark management: Manage bookmarks.
8
. Jump start: Enter a precise time in the box and click the arrow button to jump start the playback to this
selected time.
9
. Zoom: Zoom in and out of the timebar.
Display order of cameras on screen
By default, playback is in full-screen mode. You can easily change the display mode to
multiscreen using the single/multiscreen buttons at the bottom of the screen. You can play back
up to 16 cameras at a time.
When using multiscreen mode, you can manually select the order in which the cameras appear
on screen during play back. Camera 1 by default is always the camera displayed in video tile 1
and the other video tiles initially have no cameras allocated to them. The time bar underneath is
located at midnight of the current day for the first video tile. The name of the camera associated
with a selected video tile is displayed in the upper right of the screen under “Camera No.” See
Figure 11 below.
Figure 11: Associating a camera with a video tile
To select the display order of cameras:
1. Click Playback in the menu toolbar. The playback interface appears on screen.
2. Select the first video tile and click the name of the camera in the camera panel. The name
turns green and also appears under “Camera No.”.
Note: A message is displayed if there is no recording associated with this camera,
3. Select the next video tile and click the camera name to be associated with this tile.
4. Repeat step 3 for each camera to be displayed.