User Manual

5BChapter 6: Playback functionality
TruVision NVR 71 User Manual 29
Play back by camera
See Figure 10 on page 27 for a description of the playback control toolbar.
Double-click a video tile to get full-screen mode. Double-click it again to return to the playback
window.
To search and play back recordings from specific cameras:
1. Click Playback in the menu toolbar. The playback interface appears on screen.
2. In the camera panel on the left, select which cameras you want to play back. The camera
recordings will be displayed in sequential order in the video tiles.
3. In the calendar, click the day of the week you want to play back. Days marked with a blue
tab have recordings.
4. Click Search and then the Play button.
Playback starts immediately in the video tiles. Playback of the recording starts from the time
set in the time field for all the selected cameras. If you want a different start time for
playback, slide the timeline to the desired time for each tile.
The playback speed of the camera is displayed on the top right of the screen under “Current
Status”.
Note: A message appears if there are no recordings found in a video tile for the requested
camera or time period.
5. Use the playback control toolbar to manually control playback.
Synchronize play back across cameras
If several cameras are playing back simultaneously, you can synchronize their playback times
so that it is easy to follow events across recordings.
Note: Up to 16 cameras can be played back simultaneously.
To synchronize play back from several cameras:
1. Click Playback in the menu toolbar. The playback interface appears on screen.
2. In the camera panel on the left, select which cameras you want to play back. The camera
recordings will be displayed in sequential order in the video tiles.
3. In the calendar, click the day of the week you want to play back. Days marked with a blue
tab have recordings.
4. Click Search and then the Play button.
Play back starts immediately in the video tiles. Playback of the recording starts from the
time set in the time field for all the selected cameras. If you want a different start time for
play back, slide the timeline to the desired time for each tile.