User Manual

ManualsBrandsInterlogix ManualsElectronics128 Channels TruVision Network Video Recorder, RAID, 576 Mbps, 3U, 32TB

Table Of Contents

Important information
Chapter 1 Product introduction
- Product overview
- Activate the admin password
Chapter 2 Physical installation
- Installation environment
- Unpacking the recorder and its accessories
- Back panel description
- HDD slots
- Rack mounting
Chapter 3 Getting started
- Power on the recorder
- The startup wizard
Chapter 4 Operating instructions
- Control the recorder
- Front panel description
- Access the web browser
- Web browser interface
Chapter 5 Live view
- Web browser live view
- Custom views
- Digital zoom
- Control a PTZ dome camera
Chapter 6 Playback functionality
- Overview of the playback view
- The playback control toolbar
- Display order of cameras on screen
- Play back by camera
- Synchronize play back across cameras
- Playback speed
- Digital zoom in playback
- Capture snapshots
- Create video clips
- Create bookmarks
Chapter 7 Searching files
- Advanced search video menu
- Search and play back recordings by time and video type
- Search and play back recordings by event
- Search bookmarked recordings
- Search snapshots
- Search event logs
Chapter 8 Archiving files
- Overview of archiving
- Auto archiving
- Export video recordings and snapshots via TruVision Navigator
- Using TruVision Player
- Watermarking
Chapter 9 Web browser configuration
- Windows operating system
- Access the web browser
- Configure the recorder via the browser
Chapter 10 Camera setup
- IP camera status
- Import and export IP camera configuration settings
- Camera recording settings
- Camera OSD
- Motion detection
- Privacy mask
- Camera tamper
- Text overlay
- Image settings
- V-stream encoding
- Object counting
- Video analytics
Chapter 11 Network settings
- Network settings
- PPPoE settings
- DDNS settings
- NTP server settings
- Email settings
- Configure an FTP server to store snapshots
- SNMP settings
- Add a network storage system
- UPnP settings
- HTTPS settings
- Network statistics
- Filter IP addresses
Chapter 12 Recording
- Recording schedule
- Manual recording
- Hot spare
Chapter 13 Alarm and event setup
- Set up alarm inputs
- Set up alarm outputs
- Manual trigger
- Buzzer settings
- Alarm notification
- Detect video loss
- Alarm host setup
- Intrusion integration alarm reporting
Chapter 14 Device management
- Time and date settings
- General recorder settings
- Configuration files
- Upgrade system firmware
- Holiday schedules
- Configure the RS-232 port
Chapter 15 Storage management
- HDD information
- Install HDDs
- Storage mode
- S.M.A.R.T. settings
- RAID settings
Chapter 16 User management
- Add a new user
- Customize a user’s access privileges
- Delete a user
- Modify a user
- Change the Administrator’s password
Chapter 17 System information
- View system information
Appendix A Specifications
Appendix B Port forwarding information
- Seeking further assistance
Appendix C TruVision Mac Safari browser plug-in v3.0
Appendix D Guidelines when using high camera count (>32 cameras)
- Introduction
- Hard drive configuration
- Network configuration
- Event recording triggers
Appendix E Default menu settings
Index

7BChapter 8: Archiving files

42 TruVision NVR 71 User Manual

3. Select Enable Auto Archive.

4. Select the start and end date and time periods during which archiving can occur

automatically.

5. Under Interval Time, select the desired interval time for archiving.

The interval time options available are: 1 hour, 2 hours, 4 hours, 8 hours, 24 hours, or once

only. Default is 1 hour.

6. Select the camera to auto archive.

7. Select the type of video files to be archived: Manual, Constant, Motion, Alarm, and VCA.

More than one type can be selected.

8. You can copy these selected parameters to other cameras. Under the section “Copy to

Camera, select the desired cameras.

9. Select how the recorder responds if the backup device becomes full. There are two options:

Stop Archiving or Overwrite.

If overwrite is selected, the oldest files are overwritten.

10. Under Device Type, select Local Device or Network Storage.

11. Under Device Select, select the backup device used.

12. If you change any options, click Refresh.

13. Click Save.