User Manual

8BChapter 9: Web browser configuration
46 TruVision NVR 71 User Manual
Access the web browser
To access the recorder, open the Microsoft Internet Explorer web browser and enter the IP
address assigned to the recorder, as a web address. On the logon window, enter the user
name and password.
The default values for recorder network settings are:
• IP address - 192.168.1.82
• Subnet mask - 255.255.255.0
• Gateway address - 192.168.1.1
• Server port: 8000
• Ports:
When using the browser:
RTSP port: 554
HTTP port: 80
When using TruNav:
RTSP port: 554
Server/Client software port: 8000
For more information on port forwarding, see Appendix B “Port forwarding information” on page
115.
Select a camera and a day to search from on the calendar displayed, and then click Search.
The timeline below the page indicates video recorded for the specified day. The timeline also
classifies by color the type of recording with each type.
Click and drag the marker across the timeline on where you want video playback to begin, and
then click Play on the playback control toolbar. You can capture a snapshot of a video image,
save the video playback, or download the recorded video.
Configure the recorder via the browser
Click Configuration on the menu toolbar to display the configuration window. There are two
ways to configure the recorder: Browser and Remote.
Note: You must run Microsoft Internet Explorer as administrator.
Browser configuration
Browser configuration lets you define communication and network parameters such as protocol
type, maximum file size, stream type and network transmission settings. You can also specify
the directory locations for saving recorded and playback video, captured images, and
downloaded files.
The browser interface settings are saved on your PC, not on the recorder.
See Figure 14 on page 47 for information on browser configuration settings.