User Manual

ManualsBrandsInterlogix ManualsElectronics128 Channels TruVision Network Video Recorder, RAID, 576 Mbps, 3U, 32TB

Table Of Contents

Important information
Chapter 1 Product introduction
- Product overview
- Activate the admin password
Chapter 2 Physical installation
- Installation environment
- Unpacking the recorder and its accessories
- Back panel description
- HDD slots
- Rack mounting
Chapter 3 Getting started
- Power on the recorder
- The startup wizard
Chapter 4 Operating instructions
- Control the recorder
- Front panel description
- Access the web browser
- Web browser interface
Chapter 5 Live view
- Web browser live view
- Custom views
- Digital zoom
- Control a PTZ dome camera
Chapter 6 Playback functionality
- Overview of the playback view
- The playback control toolbar
- Display order of cameras on screen
- Play back by camera
- Synchronize play back across cameras
- Playback speed
- Digital zoom in playback
- Capture snapshots
- Create video clips
- Create bookmarks
Chapter 7 Searching files
- Advanced search video menu
- Search and play back recordings by time and video type
- Search and play back recordings by event
- Search bookmarked recordings
- Search snapshots
- Search event logs
Chapter 8 Archiving files
- Overview of archiving
- Auto archiving
- Export video recordings and snapshots via TruVision Navigator
- Using TruVision Player
- Watermarking
Chapter 9 Web browser configuration
- Windows operating system
- Access the web browser
- Configure the recorder via the browser
Chapter 10 Camera setup
- IP camera status
- Import and export IP camera configuration settings
- Camera recording settings
- Camera OSD
- Motion detection
- Privacy mask
- Camera tamper
- Text overlay
- Image settings
- V-stream encoding
- Object counting
- Video analytics
Chapter 11 Network settings
- Network settings
- PPPoE settings
- DDNS settings
- NTP server settings
- Email settings
- Configure an FTP server to store snapshots
- SNMP settings
- Add a network storage system
- UPnP settings
- HTTPS settings
- Network statistics
- Filter IP addresses
Chapter 12 Recording
- Recording schedule
- Manual recording
- Hot spare
Chapter 13 Alarm and event setup
- Set up alarm inputs
- Set up alarm outputs
- Manual trigger
- Buzzer settings
- Alarm notification
- Detect video loss
- Alarm host setup
- Intrusion integration alarm reporting
Chapter 14 Device management
- Time and date settings
- General recorder settings
- Configuration files
- Upgrade system firmware
- Holiday schedules
- Configure the RS-232 port
Chapter 15 Storage management
- HDD information
- Install HDDs
- Storage mode
- S.M.A.R.T. settings
- RAID settings
Chapter 16 User management
- Add a new user
- Customize a user’s access privileges
- Delete a user
- Modify a user
- Change the Administrator’s password
Chapter 17 System information
- View system information
Appendix A Specifications
Appendix B Port forwarding information
- Seeking further assistance
Appendix C TruVision Mac Safari browser plug-in v3.0
Appendix D Guidelines when using high camera count (>32 cameras)
- Introduction
- Hard drive configuration
- Network configuration
- Event recording triggers
Appendix E Default menu settings
Index

9BChapter 10: Camera setup

TruVision NVR 71 User Manual 59

To enable V-streaming:

1. From the menu toolbar, click Configuration > Remote Configuration > Camera Setup >

V-stream Encoding.

2. Select Enable V-stream.

3. Select the desired settings for frame rate (fps) and maximum bit rate (Kbps).

4. Select the screen mode. Select 1*1, 2*2, 1+5, 1+7, 3*3, or 4*4.

5. Select the screen order of the cameras.

6. Click Save to save the settings.

Object counting

This function helps to calculate the number of people or objects entering or exiting a configured

area and is primarily used with entrances or exits.

Set up the people counting function from the camera itself. Please refer to the camera’s

configuration manual for further information.

Note: Only TruVision Series 4 cameras currently support counting. This function cannot

distinguish between a moving person and a moving object.

To set up counting statistics:

Note: An SD card must be installed and configured in the camera in order to save count data

and generate reports.

1. From the menu toolbar, click Camera Setup > People Counting.

2. Select the camera from which you want to count objects.

3. Select the report type: Daily report, Weekly report, Monthly report, or Annual report.

Daily report calculates the data on the selected date. Weekly report calculates for the week

of the selected date. Monthly report calculates for the month of the selected date. Annual

report calculates for the year of the selected date.

4. Under Statistics Time, select the desired day/month/year for the report.

5. Click Counting to list the people/object counting result. The camera pushes the counting

data to the recorder every 15 minutes. As a result there might be differences between the

counting data seen via the camera webpage and via the recorder.

Video analytics

VCA (video content analysis) is the intelligent analysis of video to detect events of interest.

When the function is enabled, the recorder can handle VCA alarms generated by Interlogix

cameras that support the VCA feature.