User Manual

9BChapter 10: Camera setup
TruVision NVR 71 User Manual 61
If Face Detected has been selected, also enable Enable Dynamic Analysis for Face
Detection.
4. If you have selected Face Detected or Defocus Detected, set the sensitivity level.
5. If you have selected Audio Input Exception, enable Audio Loss Detection, Sudden
Increase of Sound Intensity Detection and/or Sudden Decrease of Sound Intensity
Detection.
For Sudden Increase of Sound Intensity Detection set the levels for sensitivity and
sound intensity threshold.
For Sudden Decrease of Sound Intensity Detection set the sensitivity level.
6. If you have selected Cross Line Detected, Intrusion Detected, Enter Region Detected, Exit
Region Detected, Object Left Behind Detected, or Object Removed Detected, click the Area
Settings tab. Draw the areas on the image that will be sensitive to motion, and set the
sensitivity and threshold values.
7. Click the Arming Schedule tab to set the schedule for the detection.
Place the mouse cursor on the schedule start time for the desired day of the week and drag
it to the end time to mark the schedule for that day. Repeat the process for the other days
of the week.
To copy a day’s schedule to other days, place the mouse cursor on the day of the week to
copy. A green icon appears at the end of the line. Click it and in the pop-up menu that
apears, select the days of the week to which to copy this schedule and click OK.
Repeat this step for each camera.
8. Click the Actions tab to define which actions are required with the VCA events from each
camera.
Set the alarm linking method:
Select the method by which you want the recorder to notify you of the alarm: Enable Alarm
Audio, Notify Alarm Host, and Send Email. See page 83 for the list of alarm notification
types.
Set the alarm outputs to be triggered:
Set the external alarm outputs to be triggered when an event occurs. Select “Select All” or
each individual alarm output.
Set the cameras to be recorded:
Set the channels to be recorded when an event occurs. Check “Select All” or select each
individual channel.
Set the PTZ linking to be triggered:
Select the PTZ camera for linking and select the preset, preset tour, and/or a shadow tour
to be triggered when the alarm is detected. Enable the preset, preset tour, and/or a shadow
tour.
9. Click Save to save the settings.