User Manual

10BChapter 11: Network settings
68 TruVision NVR 71 User Manual
2. Enter the required settings.
Option
Description
Sender
Enter the name of the sender of the email.
Sender’s Address
Enter the sender’s email address.
SMTP Server
Enter the SMTP server’s IP address.
SMTP Port
Enter the SMTP port. The default TCP/IP port for SMTP is 25.
Enable SSL/TLS
Select the check box to enable the SSL or TLS cryptographic
protocol required
by the SMTP server. The recorder will auto-detect which encryption method is
being used.
SSL/TLS is an encryption method that is used to increase the security level of
data transfer via email.
Include Snapshot
Select if you want to send an email with attached alarm images.
Interval
Select an interval range. Default is two seconds.
The interval range represents the time range in between the alarm images
being sent. For example, if you set the interval range at two seconds, the
second alarm image will be sent two seconds after the first alarm image
Enable Server Authentication
Select the check box if your mail server requires authentication and enter the
login user name and password.
User Name
If the mail server requires authentication, enter the login user name.
Password
If the mail server requires authentication, enter the login password.
R
eceiver Enter an email recipient. Up to three receivers can be entered.
Receiver’s Address
Enter the email address of the selected receiver.
Test
Click the Test button to confirm that the settings have been correctly
configured.
3. Click Test to the test email settings for each email address.
Note: We recommend that you test the email settings after entering values in the email
window.