User Manual

12BChapter 13: Alarm and event setup
TruVision NVR 71 User Manual 85
• Face Detected: A camera has detected that a human face is moving towards it.
• Defocus Detected: There is image blur caused by defocusing the lens.
• Scene Change: A camera has detected a change in the scene caused by an intentional
rotation of the camera.
• Enter Region Detected: A camera has detected that an object, such a vehicle, people or
other objects, has entered a designated region.
• Exit Region Detected: A camera has detected that an object, such a vehicle, people or
other objects, has exited a designated region.
• Object Left Leave Behind: A camera has detected that an object has been left in a
designated region, such as baggage.
• Object Removed: A camera has detected that an object has been removed from a
designated region, such as exhibits on display.
• Enter Region Detected: A camera has detected that an object, such a vehicle, people or
other objects, has entered a designated region.
• Exit Region Detected: A camera has detected that an object, such a vehicle, people or
other objects, has exited a designated region.
• Leave Behind: A camera has detected that an object has been left in a designated region,
such as baggage.
• Object Removed: A camera has detected that an object has been removed from a
designated region, such as exhibits on display.
To view events in the notification center
1. From the menu toolbar, click Configuration > Remote Configuration > Alarm & Event
Setup > Notifications.
2. Click the Event Hint Settings button. Check those required. All event items selected will be
listed in the Notification Center if triggered. All notifications are selected by default.
Detect video loss
Video may be lost if the camera develops a fault, is disconnected, or is damaged. You can set
up the recorder to detect video loss and trigger a system notification.
To setup video loss detection:
1. From the menu toolbar, click Configuration > Remote Configuration > Alarm & Event
Setup > Video Loss.
2. Select a camera to configure for video loss detection.
3. Check the Enable Video Loss Alarm box to enable the feature.
4. Select the arming schedule for video loss.