User Manual

12BChapter 13: Alarm and event setup
88 TruVision NVR 71 User Manual
4. Under Zone Number, select the desired zone number. The zone number can be any valid
number of the panel, which does not need to match the zone number.
5. Select the arming schedule for the intrusion alarm.
a) Click the Arming Schedule tab. Click the timeline of the desired day of the week. The
Edit schedule window pops up. Enter the start and end times of the arming schedule.
Click Save.
You can define up to eight different periods during a day, and a different schedule for
each day of the week.
Note: The time periods defined cannot overlap.
b) To copy a day’s schedule to another day of the week click , which appears at the end
of the day’s timeline. The Copy to pop-up menu appears. Select the day or days of the
week to which to copy this day’s arming schedule and click OK.
6. Specify the linkage method when an alarm occurs.
a) Click the Actions tab. Select the method by which you want the recorder to notify you of
the intrusion panel alarm: Enable Alarm Audio, Notify Alarm Host, Send Email (see page
83 for the description of these alarm response types).
b) Specify which alarm outputs are triggered when an alarm occurs.
c) Select the cameras to be triggered when an intrusion panel alarm is detected.
d) Select the PTZ camera function required in response to an alarm.
Under PTZ Linking, enable the preset, preset tour or shadow tour to be triggered when
the alarm is detected and enter the preset, preset tour or shadow tour number.
e) Click OK to save the changes and return to the Intrusion Zone Setup window.
7. To copy the intrusion panel’s arming schedule to up to three other intrusion panels, select
the desired intrusion panels and zones under “Copy to” at the bottom of the window.
8. Click Save to save the intrusion zone setup parameters.
To set up an alarm panel in the recorder:
1. From the menu toolbar, click Alarm & Event Setup > Intrusion Panel Setup.