User Manual

12BChapter 13: Alarm and event setup
90 TruVision NVR 71 User Manual
c) Click the button to set up the actions linked to the panel heartbeat alarm. Go to step
7 for further information.
5. Set up the panel arming alarm parameters.
a) Select the Enable Panel Arming Event check box to enable the panel arming event.
When the panel is armed, it will be reported to the recorder.
b) Click the button to set up the actions linked to the panel arming event. Go to step 7
for further information.
6. Set up the panel disarming alarm parameters.
a) Select the Enable Panel Disarming Event check box to enable the panel disarming
event. When the panel is armed, it will be reported to the recorder.
b) Click the button to set up the actions linked to the panel disarming event. Go to step
7 for further information.
7. To define the actions for the heartbeat, panel arm and panel disarm alarms that are
reported by the intrusion panel, click and do the following:
a) Click the Arming Schedule tab. Click the timeline of the desired day of the week. The
Edit schedule window pops up. Enter the start and end times of the arming schedule
and click Save.
You can define up to eight different periods during a day, and a different schedule for
each day of the week.
Note: The time periods defined cannot overlap.
b) Click the Actions tab. Select the method by which you want the recorder to notify you of
the intrusion panel alarm: Enable Alarm Audio, Notify Alarm Host, Send Email (see page
83 for the description of these alarm response types).
c) Specify which alarm outputs are triggered when an alarm occurs.
d) Select the cameras to be triggered (recorded) when an intrusion panel alarm is
detected.
Under PTZ Linking, enable the preset, preset tour or shadow tour to be triggered when
the alarm is detected and enter the preset, preset tour or shadow tour number.
e) Click OK to save the changes and return to the Intrusion Panel Setup window.
8. Click Save to save the intrusion panel setup parameters.