User Manual

13BChapter 14: Device management
94 TruVision NVR 71 User Manual
To restore parameters to default factory settings:
1. From the menu toolbar, click Configuration > Remote Configuration > Device
Management > Configuration Files.
2. To restore all parameters, except network settings, to default factory settings: Click the
Restore button. Enter the Admin password, click OK, and then click Yes to confirm that you
want to restore all parameters except network settings to default.
 Or 
To restore all parameters to default factory settings: Click the Default button. Enter the
Admin password, click OK, and then click Yes to confirm that you want to restore all
parameters to default.
The changes are immediately implemented.
Import and export files
Insert an external storage device in the recorder. Go to the Configuration > Remote
Configuration > Device Management > Configuration Files to import or export configuration
settings.
To export the recorder’s configuration parameters into an external storage device, click the
Export button.
To import configuration parameters from an external storage device, enter the location of the
file to select it and click Import.
Upgrade system firmware
The firmware on the recorder can be updated using three methods:
 Via a USB device
 Via the recorder web browser
 Using TruVision Navigator. For further information, refer to the TruVision Navigator user
manual.
The firmware upgrade file is labeled TVN70.dav.
To update the system firmware using the browser:
1. Download the latest firmware from our web site at:
www.interlogix.com
- Or -
https://firesecurityproducts.com/products/video/recorders
2. From the menu toolbar, click Configuration > Remote Configuration > Device
Management > Upgrade Firmware.
3. Select the firmware file and click Upgrade. Click Yes to begin the upgrade process.