User Manual
Table Of Contents
- Chapter 1 Product introduction
- Chapter 2 Installation
- Chapter 3 Getting started
- Chapter 4 Recording
- Chapter 5 Alarm settings
- Chapter 6 Network settings
- Configuring general network settings
- Configuring DDNS
- Configuring an NTP server
- Configuring email
- Configuring UPnP
- Configuring SNMP
- Configuring an FTP server to store snapshots
- Configuring a remote alarm host
- Configuring multicast
- Configuring the server and HTTP ports
- Configuring the RTSP service port
- Telnet setup
- Checking network status
- Exporting network packet data
- Chapter 7 HDD management
- Chapter 8 Operating instructions
- Chapter 9 Live view
- Chapter 10 Controlling a PTZ camera
- Chapter 11 Playing back a recording
- Chapter 12 Archiving recorded files
- Chapter 13 Recorder management
- Chapter 14 Camera settings
- Chapter 15 User management
- Chapter 16 Using the web browser
- Appendix A Specifications
- Appendix B PTZ protocols
- Appendix C Port forwarding information
- Appendix D KTD-405 keypad
- Appendix E Maximum pre-recording times
- Appendix F Supported PTZ commands
- Appendix G Default menu settings
- Index
TruVision DVR 12 User Manual 113
Remote configuration settings
• Remote Log Search: Remotely view logs that are saved on the recorder.
• Remote Parameter Settings: Remotely configure parameters and import
configuration.
• Remote Serial Port Control: For future use.
• Remote Video Output Control: For future use.
• Two-Way Audio: Use two-way audio between the remote client and the
recorder.
• Remote Alarm Control: Remotely alert or control the relay output of the
recorder. Alarm and notification settings must be configured properly to
upload to host.
• Remote Advanced Operation: Remotely manage HDDs (initializing and
setting properties for HDDs) as well as remotely update system firmware and
clear the I/O alarm output.
• Remote Shutdown/Reboot: Remotely shutdown or reboot the recorder.
• V-stream: Remotely configure v-stream.
Camera configuration settings
By default, all analog cameras are enabled for operators for each of these
settings and none for guests.
• Camera Permission: Select the cameras that can be accessed by the user.
• Local Live View: Select and view live video locally on the recorder.
• Local Playback: Locally play recorded files that are on the recorder.
• Local Manual Operation: Locally start/stop manual recording on any of the
channels, snapshots and video clips.
• Local PTZ Control: Locally control PTZ dome cameras.
• Local Video Export: Locally back up recorded files from any of the channels.
• Remote Live View: Select and view live video over the network.
• Remote Playback: Remotely play and download recorded files that are on
the recorder.
• Remote Manual Operation: Remotely start/stop manual recording on any of
the channels, snapshots and video clips.
• Remote PTZ Control: Remotely control PTZ dome cameras.
• Remote Video Export: Remotely back up recorded files from any of the
channels.