User Manual
Table Of Contents
- Chapter 1 Product introduction
- Chapter 2 Installation
- Chapter 3 Getting started
- Chapter 4 Recording
- Chapter 5 Alarm settings
- Chapter 6 Network settings
- Configuring general network settings
- Configuring DDNS
- Configuring an NTP server
- Configuring email
- Configuring UPnP
- Configuring SNMP
- Configuring an FTP server to store snapshots
- Configuring a remote alarm host
- Configuring multicast
- Configuring the server and HTTP ports
- Configuring the RTSP service port
- Telnet setup
- Checking network status
- Exporting network packet data
- Chapter 7 HDD management
- Chapter 8 Operating instructions
- Chapter 9 Live view
- Chapter 10 Controlling a PTZ camera
- Chapter 11 Playing back a recording
- Chapter 12 Archiving recorded files
- Chapter 13 Recorder management
- Chapter 14 Camera settings
- Chapter 15 User management
- Chapter 16 Using the web browser
- Appendix A Specifications
- Appendix B PTZ protocols
- Appendix C Port forwarding information
- Appendix D KTD-405 keypad
- Appendix E Maximum pre-recording times
- Appendix F Supported PTZ commands
- Appendix G Default menu settings
- Index
92 TruVision DVR 12 User Manual
7. To play back another camera, move the cursor to the right edge of the
window to display the list of cameras and select the desired camera.
8. To do another search:
Click the Video Search icon in bottom right of the playback control toolbar or
right-click the mouse and select Event Search from the list.
The search window reappears. Reselect the search criteria.
Playing back recordings by event
You can search recorded video by event type: alarm inputs, motion detection and
POS/ATM text insertion. Video can be played back simultaneously across
several cameras.
To play back search results by event:
1. In live view mode right-click the mouse and in the mouse menu select
Advanced Search > Event.
2. Select the desired event type from the drop-down list (Alarm input, Motion or
Text insertion) as well as the start and end time of the recording.
3. Select the desired alarm inputs.
If you selected “Motion” as the event type, select the required cameras. If you
selected “Text insertion”, select the required cameras and enter the desired
keywords.
4. Click Search. The list of search results appears.
5. Play back the search results:
If there is only one camera in the search result, click its playback button.
Playback starts.
If there is more than one camera listed, click the playback button of one of
the cameras. In the window that appears, select the cameras you want to play
back simultaneously and click OK. Playback starts.
6. To hide the playback control toolbar during playback, right-click the mouse
and select the Control Panel button in the mouse menu. Click again for the
panel to reappear.
7. Use the playback control toolbar to manually control playback.
8. To play back another camera, move the cursor to the right edge of the
window to display the list of cameras and select the desired camera.
9. To do another search:
Click the Event Search icon in bottom right of the playback control toolbar or
right-click the mouse and select Event Search from the list.
The search window reappears. Reselect the search criteria.