User Manual
Table Of Contents
- Network access
- Checking your web browser security level
- Accessing the camera over the network
- Overview of the camera web browser
- Configuration menu overview
- Local configuration
- System time
- Network settings
- Recording parameters
- Video image
- OSD (On Screen Display)
- Overlay text
- Privacy masks
- Motion detection alarms
- Tamper-proof alarms
- Exception alarms
- Alarm inputs and outputs
- Cross line detection
- Intrusion Detection
- Camera management
- Camera operation
- Index
8 TruVision Panoramic Wi-Fi Wedge IP Camera Configuration Manual
Camera configuration
This chapter explains how to configure the cameras through a web browser.
Once the camera hardware has been installed, configure the camera’s settings
through the web browser. You must have administrator rights in order to
configure the cameras over the internet.
The camera web browser lets you configure the camera remotely using your PC.
Web browser options may vary depending on camera model.
There are two main folders in the configuration panel:
Local configuration
Configuration
Configuration menu overview
Use the Configuration panel to configure the network, camera, alarms, users,
transactions and other parameters such as upgrading the firmware. See Figure 2
below for descriptions of the configuration folders available.
Figure 2: Configuration panel (Device Information tab selected)
Table 2: Description of the Configuration parameters
Configuration folders Description
1.
System
Defines device basic information including
SN and the current firmware
version, time settings, maintenance, and serial port parameters. See
“System time” on page 10, “Restore default settings” on page 52, and
“Upgrade firmware” on page 54 for more information.
2.
Network
Defines the network parameters required to access the camera over
the internet. See “Network settings” on page 12 for more information.