User Manual
Table Of Contents
- Network access
- Checking your web browser security level
- Accessing the camera over the network
- Overview of the camera web browser
- Configuration menu overview
- Local configuration
- System time
- Network settings
- Recording parameters
- Video image
- OSD (On Screen Display)
- Overlay text
- Privacy masks
- Motion detection alarms
- Tamper-proof alarms
- Exception alarms
- Alarm inputs and outputs
- Cross line detection
- Intrusion Detection
- Camera management
- Camera operation
- Index
TruVision Panoramic Wi-Fi Wedge IP Camera Configuration Manual 15
To define the DDNS parameters:
1. In the Network panel, click the DDNS tab to open its window.
2. Check Enable DDNS to enable this feature.
3. Select DDNS Type. Three options are available:
• DynDNS: Enter the user name and password registered to the DynDNS
web site. The domain name is that of the DynDNS web site.
• ezDDNS: Enter the host name. It will automatically register it online.
• IPServer: Enter the address of the IP Server.
4. Enter the host name.
5. Enter the Effect Domain address. Click the Get URL button to browse for the
required address.
6. Click Save to save changes.
To define the PPPoE parameters:
1. In the Network panel, click the PPPoE tab to open its window.
2. Check Enable PPPoE to enable this feature.
3. Enter User Name, Password, and Confirm password for PPPoE access.
4. Click Save to save changes.