User Manual
Table Of Contents
- Network access
- Checking your web browser security level
- Accessing the camera over the network
- Overview of the camera web browser
- Configuration menu overview
- Local configuration
- System time
- Network settings
- Recording parameters
- Video image
- OSD (On Screen Display)
- Overlay text
- Privacy masks
- Motion detection alarms
- Tamper-proof alarms
- Exception alarms
- Alarm inputs and outputs
- Cross line detection
- Intrusion Detection
- Camera management
- Camera operation
- Index
16 TruVision Panoramic Wi-Fi Wedge IP Camera Configuration Manual
To define the SNMP parameters:
1. In the Network panel, click the SNMP tab to open its window.
2. Select the corresponding version of SNMP: v1, v2c or v3.
3. Configure the SNMP settings. The configuration of the SNMP software should
be the same as the settings you configure here.
4. Click Save to save changes.
Note: Before setting the SNMP, please download the SNMP software and
manage to receive the camera information via the SNMP port. By setting the
Trap Address, the camera can send the alarm event and exception messages to
the alarm recipient. The SNMP version you select should be the same as that of
the SNMP software.