User Manual
Table Of Contents
- Network access
- Checking your web browser security level
- Accessing the camera over the network
- Overview of the camera web browser
- Configuration menu overview
- Local configuration
- System time
- Network settings
- Recording parameters
- Video image
- OSD (On Screen Display)
- Overlay text
- Privacy masks
- Motion detection alarms
- Tamper-proof alarms
- Exception alarms
- Alarm inputs and outputs
- Cross line detection
- Intrusion Detection
- Camera management
- Camera operation
- Index
18 TruVision Panoramic Wi-Fi Wedge IP Camera Configuration Manual
Test: Test whether the FTP address is accessible.
3. Click Save to save changes.
To define the parameters:
1. In the Network panel, click the tab to open its window.
Note: When configuring the settings for the first time please connect the
camera to a router via a network cable and open the web browser to
complete the settings. When the Status changes from “Disconnected” to
“Connected” the Wi-Fi connection has been set up successfully.
2. Click Search to search the online Wi-Fi connections.
3. Select a Wi-Fi connection from the list.
4. Select the Network Mode as Manage or Ad-hoc
When Manage Mode is selected, the Security Mode is automatically shown
when you select a Wi-Fi connection from the list.
Select Ad-Hoc Mode when accessing the camera via a PC without going
through a Wi-Fi router. You can identify the camera SSID and specify the
Security Mode as needed.