User Manual
Table Of Contents
- Network access
- Checking your web browser security level
- Accessing the camera over the network
- Overview of the camera web browser
- Configuration menu overview
- Local configuration
- System time
- Network settings
- Recording parameters
- Video image
- OSD (On Screen Display)
- Overlay text
- Privacy masks
- Motion detection alarms
- Tamper-proof alarms
- Exception alarms
- Alarm inputs and outputs
- Cross line detection
- Intrusion Detection
- Camera management
- Camera operation
- Index
TruVision Panoramic Wi-Fi Wedge IP Camera Configuration Manual 19
5. You can choose the Security Mode as not-encrypted, WEP, WPA-personal,
WPA-enterprise, WPA2-personal, or WPA2-enterprise.
6. For quick setup, check the WPS check box to enable the WPS function.
PBC mode: Push the WPS button on the Wi-Fi router. The WPS indicator will
flash (the WPS settings may differ per device. Please refer to the Wi-Fi router
user manual for details). Check the PBC connection check box and click the
Connect button. The camera and the Wi-Fi network router are connected
automatically.
PIN Mode: Please check the Wi-Fi router device and find the PIN code, which
is printed on a sticker or printed on the device. Enter the PIN code in the
Router PIN Code text bar and check the Use router PIN code. Then click
Connect to connect the camera to the Wi-Fi router.
You can generate the PIN code on the camera side and configure the Wi-Fi
router to finish the connection setting (please refer to the Wi-Fi router user
manual for details). Please note that the PIN code expiration time is 120
seconds.