User Manual
Table Of Contents
- Network access
- Checking your web browser security level
- Accessing the camera over the network
- Overview of the camera web browser
- Configuration menu overview
- Local configuration
- System time
- Network settings
- Recording parameters
- Video image
- OSD (On Screen Display)
- Overlay text
- Privacy masks
- Motion detection alarms
- Tamper-proof alarms
- Exception alarms
- Alarm inputs and outputs
- Cross line detection
- Intrusion Detection
- Camera management
- Camera operation
- Index
20 TruVision Panoramic Wi-Fi Wedge IP Camera Configuration Manual
To define the IP address settings:
1. In the Network panel, click the TCP/IP tab to open its window.
2. Under Select the NIC, select WLAN.
3. Enter the IPv4 address, the IPv4 Subnet Mask, and the Default Gateway. If
you want to be assigned the IP address, you can check the check box to
enable the DHCP.
To define the UPnP parameters:
1. In the Network panel, click the UPnP tab to open its window.
2. Check the check box to enable the UPnP function. The name of the device
when detected online can be edited.
3. Check the Port Mapping, and select Auto or Manual mode to modify the port
number.
4. Click Save to save changes.