User Manual
Table Of Contents
- Network access
- Checking your web browser security level
- Accessing the camera over the network
- Overview of the camera web browser
- Configuration menu overview
- Local configuration
- System time
- Network settings
- Recording parameters
- Video image
- OSD (On Screen Display)
- Overlay text
- Privacy masks
- Motion detection alarms
- Tamper-proof alarms
- Exception alarms
- Alarm inputs and outputs
- Cross line detection
- Intrusion Detection
- Camera management
- Camera operation
- Index
TruVision Panoramic Wi-Fi Wedge IP Camera Configuration Manual 21
To set up the Email parameters:
1. In the Network panel, click the Email tab to open its window.
2. Configure the following settings:
Sender: Enter the name of the email sender.
Sender’s Address: Enter the email address of the sender.
SMTP Server: Enter the SMTP Server IP address or host name.
SMTP Port: Enter the SMTP port. The default is 25.
Enable SSL: Check the check box to enable SSL if it is required by the
SMTP server.
Attached Image: Check the check box if you want to send emails with
attached alarm images.
Interval: This is the time between two actions when sending attached
images.
Authentication: If your email server requires authentication, check this check
box to use authentication to log in to this server. Enter the login user name
and password.
User Name: This is the user name to log in to the server where the images
are uploaded.
Password: Enter the password.
Confirm: Confirm the password.