User Manual
Table Of Contents
- Network access
- Checking your web browser security level
- Accessing the camera over the network
- Overview of the camera web browser
- Configuration menu overview
- Local configuration
- System time
- Network settings
- Recording parameters
- Video image
- OSD (On Screen Display)
- Overlay text
- Privacy masks
- Motion detection alarms
- Tamper-proof alarms
- Exception alarms
- Alarm inputs and outputs
- Cross line detection
- Intrusion Detection
- Camera management
- Camera operation
- Index
22 TruVision Panoramic Wi-Fi Wedge IP Camera Configuration Manual
Receiver1: Enter the name of the first user to be notified.
Receiver’s Address1: The email address of the user to be notified.
Receiver2: Enter the name of the second user to be notified.
Receiver’s Address2: Enter the email address of the second user to be
notified.
Receiver3: Enter the name of the third user to be notified.
Receiver’s Address3: Enter the email address of the third user to be
notified.
3. Click Test to test the email parameters set up.
4. Click Save to save changes.
To set up the NAT parameters:
1. In the Network panel, click the NAT tab to open its window.
2. Check the check box to enable the NAT function.
3. Select Port Mapping Mode to be Auto or Manual. When you choose Manual
mode, you can set the external port as desired.
3. Click Save to save changes.
To set up the HTTPS parameters:
1. In the Network folder, click the HTTPS tab to open its window.