User Manual
Table Of Contents
- Network access
- Checking your web browser security level
- Accessing the camera over the network
- Overview of the camera web browser
- Configuration menu overview
- Local configuration
- System time
- Network settings
- Recording parameters
- Video image
- OSD (On Screen Display)
- Overlay text
- Privacy masks
- Motion detection alarms
- Tamper-proof alarms
- Exception alarms
- Alarm inputs and outputs
- Cross line detection
- Intrusion Detection
- Camera management
- Camera operation
- Index
24 TruVision Panoramic Wi-Fi Wedge IP Camera Configuration Manual
Click OK to save the settings. Download the certificate request and submit it
to the trusted certificate authority for signature, such as Symantec or RSA.
After receiving the signed valid certificate, upload the certificate to the device.
Recording parameters
You can adjust the video and audio recording parameters to obtain the image
quality and file size best suited to your needs. Figure 5 and Table 5 below list the
video and audio recording options you can configure for the camera.
Figure 5: Video/Audio Settings menu (Video tab shown)
Table 5: Video setting parameters
Parameter Description
1.
Video
Stream Type: Specifies the streaming method used.
Options include: Main Stream (Normal) and Sub Stream.
Video Type: Specifies the stream type you wish to record.
Select Video Stream to record video stream only. Select Video&Audio to
record both video and audio streams.
Note: Video is default.
Resolution: Specifies the recording resolution. A higher image resolution
provides a higher image quality but also requires a higher bit rate. The
resolution options listed depend on the type of camera and on whether main
or substream is being used.
Note: Resolutions can vary depending on the camera model.
Bitrate Type: Specifies whether variable or fixed bit rate is used. Variable
produces higher quality results suitable for video downloads and streaming.
Default is Constant.
Video Quality: Specifies the quality level of the image. It can be set when
variable bit rate is selected. Options include: Lowest, Lower, Medium, Higher
and Highest.