User Manual
Table Of Contents
- Network access
- Checking your web browser security level
- Accessing the camera over the network
- Overview of the camera web browser
- Configuration menu overview
- Local configuration
- System time
- Network settings
- Recording parameters
- Video image
- OSD (On Screen Display)
- Overlay text
- Privacy masks
- Motion detection alarms
- Tamper-proof alarms
- Exception alarms
- Alarm inputs and outputs
- Cross line detection
- Intrusion Detection
- Camera management
- Camera operation
- Index
26 TruVision Panoramic Wi-Fi Wedge IP Camera Configuration Manual
2. Draw the region of interest on the image. Only one region is supported.
3. Choose the stream type to set the ROI encoding.
4. Check the Fixed Region Enable box to manually configure the area. You can
choose the image quality enhancing level for ROI encoding, and you can also
name the ROI area.
5. Click Save to save changes.
Dual-VCA (Video Content Analysis)
When Dual-VCA mode is enabled, the camera sends video analytics results
(metadata) to an NVR or other platforms to generate a VCA alarm.
For example, with an Interlogix NVR (please check Interlogix website for the
latest NVR models supporting this feature), you can draw a virtual line in the
NVR playback window, and search the objects or people crossing this virtual line.
Note: Only cross line and intrusion detection can support dual-VCA mode.
To define Dual-VCA parameters:
1. In the Video/Audio panel, click the Display Info. On Stream tab to open its
window.
2. Check the check box to enable Dual-VCA.
3. Click Save to save changes.