User Manual
Table Of Contents
- Network access
- Checking your web browser security level
- Accessing the camera over the network
- Overview of the camera web browser
- Configuration menu overview
- Local configuration
- System time
- Network settings
- Recording parameters
- Video image
- OSD (On Screen Display)
- Overlay text
- Privacy masks
- Motion detection alarms
- Tamper-proof alarms
- Exception alarms
- Alarm inputs and outputs
- Cross line detection
- Intrusion Detection
- Camera management
- Camera operation
- Index
TruVision Panoramic Wi-Fi Wedge IP Camera Configuration Manual 31
Privacy masks
Privacy masks let you conceal sensitive areas (such as neighboring windows) to
protect them from view on the monitor screen and in the recorded video. The
masking appears as a blank area on screen. You can create up to four privacy
masks per camera.
Note: There may be a small difference in size of the privacy mask area
depending on whether local output or the web browser is used.
Figure 8: Privacy mask menu
To add privacy mask area:
1. In the Image panel, click the Privacy Mask tab to open its window.
2. Check the Enable Privacy Mask.
3. Click Draw Area.
4. Click and drag the mouse in the live video window to draw the mask area.
Note: You are allowed to draw up to four areas on the same image.
5. Click Stop Drawing to finish drawing, or click Clear All to clear all of the
areas you set without saving them.
6. Click Save to save changes.
Motion detection alarms
You can define motion detection alarms. A motion detection alarm refers to an
alarm triggered when the camera detects motion. However, the motion alarm is
only triggered if it occurs during a programmed time schedule.