User Manual

34 TruVision Panoramic Wi-Fi Wedge IP Camera Configuration Manual
Upload Snapshot
Capture the image when an alarm is triggered and upload the
picture to NAS or FTP server.
Note: If you want to upload the snapshot to NAS, you must
configure NAS settings, If you want to upload the snapshot to
FTP, you must configure the FTP settings, please make sure
the Upload type option is enabled.
Trigger
Channel Triggers the recording to start in the camera.
Trigger Alarm Output
Trigger external alarm outputs when an event occurs.
11. Click Save to save changes.
When you choose Advanced mode, you can set different sensitivity and
proportion on different area. If you choose Auto-Switch or Schedule-Switch, you
can also set different settings on day and night or different periods.
To set up motion detection as advanced mode:
1. In the Events panel, click the Motion Detection tab to open its window.
2. Check the Enable Motion Detection box. Check Enable Dynamic Analysis
for Motion if you want to see where has motion real-time.
Note: Select Disable for rules in local configuration menu if you do not want
the detected objected displayed with the rectangles.
3. Select Advanced from the drop down menu.
4. Select OFF, Auto-switch or Scheduled-switch.
5. Select Area No. and click Draw Area. Click and drag the mouse on the live
video image to draw an area sensitive to motion detection.
6. Click Stop Drawing to finish drawing. Click Clear All to delete all areas
marked and restart drawing.
7. Move the Sensitivity and Proportion of Object on Area slider to set the
sensitivity and proportion of the detection for different areas
8. Click Edit to edit the arming schedule. See the picture below for the editing
interface of the arming schedule.