User Manual
Table Of Contents
- Network access
- Checking your web browser security level
- Accessing the camera over the network
- Overview of the camera web browser
- Configuration menu overview
- Local configuration
- System time
- Network settings
- Recording parameters
- Video image
- OSD (On Screen Display)
- Overlay text
- Privacy masks
- Motion detection alarms
- Tamper-proof alarms
- Exception alarms
- Alarm inputs and outputs
- Cross line detection
- Intrusion Detection
- Camera management
- Camera operation
- Index
TruVision Panoramic Wi-Fi Wedge IP Camera Configuration Manual 35
9. Choose the day and click to set the detailed time period. You can copy
the schedule to other days.
10. Click OK to save changes.
11. Specify the linkage method when an event occurs. Check one or more
response methods for the system when a motion detection alarm is triggered.
Notify
Alarm Recipient Send an exception or alarm signal to remote management
software when an event occurs.
Send
Email Sends an email to a specified address when there is a motion
detection alarm.
Upload Snapshot
Capture the image when an alarm is triggered and upload the
picture to NAS or FTP server.
Trigger
Channel Triggers the recording to start in the camera.
Trigger Alarm Output
Trigger external alarm outputs when an event occurs.
12. Click Save to save changes.
Tamper-proof alarms
You can configure the camera to trigger an alarm when the lens is covered and
to take an alarm response action.
To set up tamper-proof alarms:
1. In the Events panel, click the Tamper-proof tab to open its window.
2. Enable the Enable Tamper-proof box.
3. Move the Sensitivity slider to set the sensitivity of the detection. All areas will
have the same sensitivity level.