User Manual

36 TruVision Panoramic Wi-Fi Wedge IP Camera Configuration Manual
4. Click Edit to edit the arming schedule for tamper-proof alarms. The arming
schedule configuration is the same as that for motion detection. See “Motion
detection alarms” on page 31 for more information to set up motion detection.
5. Check the check box to select the linkage method taken for the tamper-proof.
6. Click Save to save changes.
Exception alarms
You can set up the camera to notify you when irregular events occur and how
you should be notified. These exception alarms include:
• HDD Full: All recording space of NAS is full.
• HDD Error: Errors occurred while files were being written to the storage, no
storage or storage had failed to initialize.
• Network Disconnected: Disconnected network cable.
• IP Address Conflicted: Conflict in IP address setting.
• Invalid Login: Wrong user ID or password used to login to the cameras.
Figure 10: Exception menu
To define exception alarms:
1. In the Events panel, click the Exception tab to open its window.
2. Under Notification Type, select an exception alarm type from the drop-down
list.
3. Check the check box to select the linkage method.
4. Click Save to save changes.