User Manual
Table Of Contents
- Network access
- Checking your web browser security level
- Accessing the camera over the network
- Overview of the camera web browser
- Configuration menu overview
- Local configuration
- System time
- Network settings
- Recording parameters
- Video image
- OSD (On Screen Display)
- Overlay text
- Privacy masks
- Motion detection alarms
- Tamper-proof alarms
- Exception alarms
- Alarm inputs and outputs
- Cross line detection
- Intrusion Detection
- Camera management
- Camera operation
- Index
38 TruVision Panoramic Wi-Fi Wedge IP Camera Configuration Manual
2. Select one alarm output channel from the Alarm Output drop-down list. You
can also set a name for the alarm output.
3. The delay time can be set to 5 s, 10 s, 30 s, 1 min, 2 min, 5 min, 10 min or
Manual. The delay time refers to the time duration that the alarm output
remains in effect after alarm occurs.
4. Click Edit to set the arming schedule for the alarm input. See “To set up
motion detection” for more information.
5. Click Save to save changes.
Cross line detection
This function can be used for detecting people, vehicles and objects crossing a
pre-defined line or an area. The line crossing direction can be set as
bidirectional, that is, from left to right or from right to left. A series of linkage
methods can be triggered if an object crossing behavior is detected.