User Manual
Table Of Contents
- Network access
- Checking your web browser security level
- Accessing the camera over the network
- Overview of the camera web browser
- Configuration menu overview
- Local configuration
- System time
- Network settings
- Recording parameters
- Video image
- OSD (On Screen Display)
- Overlay text
- Privacy masks
- Motion detection alarms
- Tamper-proof alarms
- Exception alarms
- Alarm inputs and outputs
- Cross line detection
- Intrusion Detection
- Camera management
- Camera operation
- Index
42 TruVision Panoramic Wi-Fi Wedge IP Camera Configuration Manual
Figure 13: Snapshot menu
To set up scheduled snapshots:
1. In the Storage panel, click the Snapshot tab to open its window.
2. Enable Enable Timing Snapshot.
3. Select the desired format of the snapshot.
Note: Only JPEG is available.
4. Select the desired resolution of the snapshot.
Note: Only the resolution of the current main stream is available.
5. Select the desired quality of the snapshot: High, Medium or Low.
6. Enter the time interval between two snapshots. Select the unit of time from
the dropdown list: milliseconds, seconds, minutes, hour, or day.
7. Set the schedule for when you want snapshots to be taken. Click Edit and
desired schedule for each day of the week.