User Manual
Table Of Contents
- Network access
- Checking your web browser security level
- Accessing the camera over the network
- Overview of the camera web browser
- Configuration menu overview
- Local configuration
- System time
- Network settings
- Recording parameters
- Video image
- OSD (On Screen Display)
- Overlay text
- Privacy masks
- Motion detection alarms
- Tamper-proof alarms
- Exception alarms
- Alarm inputs and outputs
- Cross line detection
- Intrusion Detection
- Camera management
- Camera operation
- Index
TruVision Panoramic Wi-Fi Wedge IP Camera Configuration Manual 47
• Normal: This is continuous recording.
• Motion detection: The video is recorded when the motion is detected.
• Alarm: The video is recorded when the alarm is triggered via the external
alarm input.
• Motion | Alarm: The video is recorded when the external alarm is
triggered or the motion is detected.
• Motion & Alarm: The video is recorded when motion and alarms are
triggered at the same time.
• Cross line: Video is recorded when the pre-defined line on-screen in
crossed.
• Intrusion Detection: Video is recorded when an intrusion is detected.
• All Events: Video is recorded when any events are detected.
5. If you selected “Customize”, click the day of the week required and then for
period 1 set the start and end times during which you want the camera to
begin and end recording.
From the drop-down list box, select one of the record types to record.
Repeat for additional periods in the day. Up to eight time periods can be
selected.
Note: The eight time periods cannot overlap.
6. Set the recording periods for the other days of the week if required.
Click Copy to copy the recording periods to another day of the week.
7. Click OK and Save to save changes.
Note: If you set the record type to “Motion detection”, “Alarm”, “Cross Line” or
“Intrusion detection” you must also define all the settings of the event and check
the option Trigger Channel in order to trigger the recording.