User Manual

TruVision Panoramic Wi-Fi Wedge IP Camera Configuration Manual 51
3. Under Web Authentication select Digest or Basic from the drop-down list.
4. Click Save to save the changes.
IP address filter
This function makes it possible for access control.
To define the IP address filter:
1. In the Security panel, click the IP Address Filter tab.
2. Enable Enable IP Address Filter.
3. Select the type of IP address filter from the drop-down list: Forbidden or
Allowed.
4. Click Add to add an IP address.
-Or -
Click Modify or Delete to modify or delete the selected IP address.
-Or -
Click Clear to delete all the IP addresses.
5. Click Save to save the changes.
Defining the security service
To enable remote login, and improve the data communication security, the
camera provides the security service for better user experience.