User Manual
Table Of Contents
- Network access
- Checking your web browser security level
- Accessing the camera over the network
- Overview of the camera web browser
- Configuration menu overview
- Local configuration
- System time
- Network settings
- Recording parameters
- Video image
- OSD (On Screen Display)
- Overlay text
- Privacy masks
- Motion detection alarms
- Tamper-proof alarms
- Exception alarms
- Alarm inputs and outputs
- Cross line detection
- Intrusion Detection
- Camera management
- Camera operation
- Index
52 TruVision Panoramic Wi-Fi Wedge IP Camera Configuration Manual
To define Telnet:
1. In the Security panel, click the Security Service tab to open its window.
2. Enable Enable Telnet.
3. Click Save to save the changes.
Note:
1. The Telnet user name is root as default and cannot be changed.
2. The default Telnet password is “ab12!”
3. The password should have least four characters with at least one letter and
one number.
To define SSH:
1. In the Security panel, select the Security Service tab to open its window.
2. Check the check box of Enable SSH.
3. Click Save to save the changes.
Restore default settings
Use the Default menu to restore default settings to the camera. There are two
options available:
Restore: Restore all the parameters, except the IP parameters, to the default
settings.
Default: Restore all the parameters to the default settings.
Note: If the video standard is changed, it will not be restored to its original setting
when Restore or Default is used.