User Manual

54 TruVision Panoramic Wi-Fi Wedge IP Camera Configuration Manual
Upgrade firmware
The camera firmware is stored in the flash memory. Use the upgrade function to
write the firmware file into the flash memory.
You need to upgrade firmware when it has become outdated. When you upgrade
the firmware, all existing settings are unchanged. Only the new features are
added with their default settings.
The camera will select the corresponding firmware file automatically. Cookies
and data in the web browser are automatically deleted when the firmware is
updated.
To upgrade firmware version:
1. Download on to your computer the latest firmware from our web site at:
www.interlogix.com/library
- Or -
www.utcfssecurityproductspages.eu/videoupgrades/
2. When the firmware file is downloaded to your computer, extract the file to the
desired destination.
Note: Do not save the file on your desktop.
3. In the System panel, click the Maintenance tab. Select the Firmware or
Firmware Directory option. Then click the Browse button to locate latest
firmware file on your computer.
• Firmware directory – Locate the upgrading folder of Firmware files. The
camera will choose the corresponding firmware file automatically.
• Firmware – Locate the firmware file manually for the camera.
Note: Please select the correct firmware for the product models listed in
“Introduction” on page 3.
4. Click Update. You will receive a prompt asking you to reboot the camera.
5. When the upgrade is finished, the device will reboot automatically. The
browser will also be refreshed.
Reboot camera
The camera can be easily rebooted remotely.
To reboot the camera through the web browser:
1. In the System panel, click the Maintenance tab.
2. Click the Reboot button to reboot the device.
3. Click OK in the pop-up message box to confirm reboot operation.