User Manual Instruction Manual

Chapter 4: Camera setup
26 UltraView IP PTZ 36X Camera User Manual
2. Check the Date&Time box to display the date/time on screen.
3. Check the Week box to include the day of the week in the on-screen display.
4. Select the date format from the Date format list box. Formats include:
• YYYY-MM-DD
• MM-DD-YYYY (Default)
• DD-MM-YYYY
5. Select the time format from the Time format list box. There are two formats
to choose: 24-hour format or 12-hour format (24-hour is default).
6. Click Save to save changes.
To modify text transparency:
1. In the Channel Parameters folder, click the Display Setting subfolder to open
its screen.
2. Select a display mode for the camera from the OSD Status list box. Display
modes include:
• Transparent & flickering. The screen image appears through the text.
The text flashes on and off.
• Transparent & unflickering. The screen image appears through the text.
This is default.
• Nontransparent & flickering. The screen image is behind the text. The
text flashes on and off.
• Nontransparent & unflickering. The screen image is behind the text.
3. Click Save to save changes.
Video recording parameters
You can adjust the video recording parameters to obtain the image quality and
file size best suited to your needs. Figure 11 on page 27 lists the recording
options you can configure for the camera.