User Manual Instruction Manual

Chapter 4: Camera setup
36 UltraView IP PTZ 36X Camera User Manual
Reset camera settings
Use this menu to return all changes made under the Camera Settings menu back
to the previously configured settings.
To reset camera settings:
1. In the Channel Parameters folder, click the Reset Image subfolder to open
its screen.
2. Click OK to the question, “Are you sure to reset the image?”.
You will receive a prompt asking you to reboot the camera.
Restore camera settings to default
Use this menu to restore all the camera settings back to the factory default
settings.
To restore camera settings:
1. In the Channel Parameters folder, click the Restore Image subfolder to
open its screen.
2. Click OK.
You will receive a prompt asking you to reboot the camera.