Manual

Chapter 2
Housings and cables
15
Figure 13. Installing the flush-mount housing
Nipple
(snipped off to access
the safety cable clip,
which is inside the housing)
3/4 in. conduit knockouts (2)
Cables fed
through mount
and housing
Ceiling ring
Ceiling
Angle brackets (2)
Housing tabs (3)
(screwed open and down
against the mount or ceiling)
Clip for safety cable
(inside housing)
Safety cable
Building superstructure
Cables are fed through: the cable entry hole in the
side (or top) of the housing. Route the wires through
the top or side of the housing and around the
camera bracket.
Upper bracket
Flush-mount cabling