Cut Sheet

ManualsBrandsIntermatic ManualsPhotocontrolsNightFox Electronic Photocontrol, Select Grade Locking Type (120-277V)

Project:

Location:

Product Type:

Contact/Phone:

Model #:

Energy Controls

EK4536

Electronic Twist-Lock Photo Control

Typical Applications

• Roadways

• Area lighting

• Areas with variable sky conditions

• Low inrush LED lighting xtures that require dusk-to-dawn control

• Floodlights and security lighting

Regulatory Listings

• ANSI C136.10-2010 Compliant

• CSA listed to U.S. & Canadian safety standards

• Surge Rated in excess of ANSI C136.10 to 20kV/10KA

Operating Speciﬁcations

• Voltage: 105 to 305 VAC, 50/60Hz

• Load rating: 1000 Watt Tungsten/1800 VA Ballast

• -40°F to 158°F (-40°C to 70°C) ambient, up to 90° interface

Advanced Design Details

• 5KV between all current carrying parts

• 370 Joule MOV surge protection

• Zero cross feature extends relay life

• Non-drifting silicon light sensor ltered for human eye response

• Conformal coated board protects against environmental conditions

• Translucent cover eliminating UV window degradation

• Fail Mode ON

• Exceeds 10,000 operations

• All components meet 20-year life requirements

Warranty

• 8-year manufacturer's warranty

EK4536

Model Number VAC

Tungsten

(Watts)

Ballast (VA)

Turn ON Foot

Candles

Turn OFF Foot

Candles

EK4536 105-305 1000 1800 1.5 fc

2.25 +/- .2 fc

2-5 second delay

Photo Controls

2.97"

2.721"

Summary of content (2 pages)

PAGE 1
EK4536 Photo Controls Project: Location: Product Type: Contact/Phone: Model #: EK4536 Electronic Twist-Lock Photo Control Typical Applications • Roadways • Area lighting • Areas with variable sky conditions • Low inrush LED lighting fixtures that require dusk-to-dawn control • Floodlights and security lighting Regulatory Listings • ANSI C136.10-2010 Compliant • CSA listed to U.S. & Canadian safety standards • Surge Rated in excess of ANSI C136.
PAGE 2
EK4536 Specification The photo control shall be a solid-state locking-type control. Switch operation shall have a rating of _________ Watts and _____Amp tungsten and ______Watts and ______ Amp ballast at _______VAC. The photo control must have the solid state light sensor integral with the rest of the electronic components. The photo control operating voltage shall be clearly identified on the control housing.