Owner's Manual

Second Holiday
• Selectthesecondreferencenumber–press2.
• PressOK.
• Selectthemonthanddaytostarttheholiday.
Example: December 22nd – press 1,2,2,2.
• PressOK.
• Selectmonthanddaytoendtheholiday
 Example:December26–press1,2,2,6.
• PressOK.
You may select up to 99 individual holidays or holiday durations (several
days). Just be sure to follow the holiday rules listed above.
On the dates which you have entered, all load switching will cease. If
youwishtohavespecialloadactivitiesonselected“Holidays”,seeSpecial
Holiday Operation under Special Load Programming. Now you are ready
to program the switching times for your loads.
PROGRAMMING LOAD OPERATION FOR FIXED TIMES
Makesureyouhavecompletedallset-updatabeforebeginningto
program.
If you make a mistake while entering data, press the CLEAR button. If
you accidentally pressPM instead of AM, simply press the proper button
before okaying the data.
• PressProgram(PROG) to enter program group mode.
• Enablethe circuit(s) for the load which you wish to program first.
Disable all others. It is recommended that you only program one load at
a time on multi-circuit models since it is easier to make changes in the
future.
• Enterthedayorgroupofdayswhichtheloadshouldswitch.
 Example:MondaythroughFriday–pressthe8/WKDY key.
PROGRAMMING LOAD OPERATION FOR FIXED
TIMES, cont’d
2
3
SUN
1
MON
2
MON
2
MON
2
FRI
6
SUN
1
MON
2
MON
2
MON
2
OK
OK
OK
WKDY
8
PROG
CLEAR
Enable
Disable
ON/OFF
2
3