Owner's Manual

ERR02 Numeric entry not applicable
ERR03 AM–PMkey entry not applicable
ERR04 Clock time not setup
ERR05 Clock date not setup
ERR06 ASTROnot setup
ERR07 HOLIDAYnot setup
ERR08 OVERRIDEnot setup
ERR09 ASTROentry not applicable
ERR10 COPYkey not applicable
ERR11 Unable to clear a set point in week long review mode – set points may only be cleared from
an individual day’s (or day group’s) program
ERR12 Internal calculation error – may not be recoverable – reset the time switch
ERR13 ‘Day groups’ are copy restricted – wkNDand wkDYgroups may be copied to Holidays
ERR14 No ON or OFFtime entry is allowed when entering an Astro Set Point
ERR15 A day may not be copied to itself or to a day which has already been programmed
ERR16 February 29th is only permitted in leap year
ERR17 No circuit selected – select a circuit(s) using the circuit enable switches
ERR18 Astro entry is out of limits – SUNRISEmust be before noon and SUNSETMUST be after
noon. SUNSETmust not be within 5 hours of SUNRISE.
ERR19 The date does not agree with the previously entered day of the week – review and correct one
of the entries
ERR20 Holidays may not end before they start and they must end by December 31
ERR21 The selected holiday has already been used – Press REVIEWto see its definition
ERR22 HOLIDAYPROGRAM must be cleared before clearing ‘HolidayNumber’
ERR23 ‘Copiedto’ days may be cleared but may not be copied or changed
ERR24 Daylight Savings error
ERR0A HOLIDAY entry not applicable
ERR0B OVERRIDE entry not applicable
ERR0C PULSE entry not applicable
ERR0D INTERVALentry not applicable
ERR0E Invalid or incomplete entry