Owner's Manual

Pulse–Ashortdurationof“loadon”activityfrom1to127secondsforbellringingorlatching
relays.
Interval–Ashortorlongdurationof“loadon”activityfrom1minutetosixdays,23hoursand
59 minutes.
Override – A timed pulse or interval programmed (option) into the clock, which is selected either
bytheON/OFFkeyorwiththeremoteswitchesonthe4,8and16circuitmodels.
Weekdays–AbbreviatedWKDYonthekeyforMondaysthroughFriday.
Weekend Days – Abbreviated WKND on the key for Saturday and Sunday.
Reset – A recessed switch used in conjunction with the CLEAR key to clear all program
information.
Enable/Disable – A slide switch (one for each circuit) used to override automatic operation in the
RUN mode and used to select the correct circuit when programming in the SET mode.
ON/OFF – A keypad which is used to toggle the loads on and off.
Holiday – A day or series of days which skip load operation or has a special load operation.
Zone–ReferringtotheAstroMapasnumbers1through8whichdeterminesinwhichzonea
particular geographic location falls.
Set-Up – A portion of programming which includes day of the week, time of the day, month, date
and year and Astro information as well as Holiday information.
Program – Abbreviated PROG on the key, a portion of programming where all switching activities
are entered.
Fixed times – Programmed times which do not change, as opposed to Astro times which change to
follow sunset and sunrise times.
ERROR CODES
Pressing HELP when an error code is displayed will cause an error message and recommended action to
scroll on display. Press any key to stop message and restore pre-error display.
ERR01 Too many keys pressed or HELP key not pressed first