Other Content

TABLE 1. Description of Modes
Mode Description
AUTO Switches ON/OFF events at programmed times.
RDM
(Random)
Varies each event up to 30 minutes from the
programmed time
MANUAL Programmed events are ignored but are saved in
memory.
6. Whenthemodicationsarecomplete,pressSET ON/OFF
EVENTStoscrollthroughall7ON/OFFevents(includingblank
 events)andreturntothetimeofdayscreen(ashingcolon).
Deleting an Event
Followthisproceduretodeleteanevent.
1. Press SET ON/OFF EVENTS toscrolltotheunwantedON
 orOFFevent.
2. PressDELETE.Thescreendisplaysdashestoindicatethe
 ONorOFFeventisdeleted.
 NOTE:Ifnecessary,repeatthisproceduretodeleteboth
 ONandOFFsettingsfortheevent.
3. Whenthemodicationsarecomplete,pressSET ON/OFF
 EVENTStoscrollthroughall7ON/OFFevents(includingblank
 events)andreturntothetimeofdayscreen(ashingcolon).
Resetting the Timer
Incaseofatimemalfunctionortodeleteallprevioussettings,the
unitcanbereset.
Toresetthetimer,useapenorbluntobjecttoPressRESET.The
timerresetsanddeletes all the settings in the unit
.
Replacing the Battery
OneAAsizealkalinebatteryisneededtocompletethisprocedure.
1. Unplugthetimerpowercord.
2. Fromtherearofthetimer,removetheretainingscrewand
 batterycover.
3. InstallthenewAAbattery(observepolarity).
4. Verifythatthecontrollerdisplayactivates.
5. Takeoneoftheseactions.
 IFTHEDISPLAY... THEN...
 Activates  Gotostep6.
 Doesnotactivate, Makesurethebatteryisnotdeadand
    isinstalledwiththeproperpolarity.
    Adjustasneededtogetthescreento
    activate.
6. Replacethebatterycoverandretainingscrew.
7. GotoSetting the Calendar, Clock and Astronomic Time.
 NOTE: Ifthetimerisgoingtobestoredforanextended
 periodoftime,itisrecommendedtoremovethebatteryto
 preservethelifeofthebattery.


TABLE 2. Selecting Operating Mode.
Mode Description
ON Load is ON permanently in MANUAL mode.
ON AUTO AUTO has been selected, load is ON, and will
stay ON until the next scheduled OFF event.
ON RDM RDM mode has been selected, load is ON,
and will stay ON until the next scheduled
RDM OFF event
OFF Load is OFF permanently in MANUAL mode
OFF AUTO AUTO mode is selected, load is OFF, and will
stay OFF until the next scheduled ON event.
OFF RDM RDM mode has been selected, load is OFF,
and will stay OFF until the next scheduled
RDM ON event.
5. Takeoneoftheseactions.
 IFYOUSELECTED... THEN...
 Aspecichour, Gotostep6.
 SunriseorSunset, PressSET ON/OFF EVENTS
  toadvancetosettingOFF
  timeforeventandgotostep8.
6. PressDATE/TIME/NEXT.Theminutedigitashes.
7. Press+or-tosettheminutefortheevent.
8. PressSET ON/OFF EVENTStosettheOFFEvent.Dashed
 linesappeartoindicatenoeventissetfortheeventnumber.
9. PressDATE/TIME/NEXT.Thescreendisplays12:00AM1
 OFF(OFFEvent1).
10.Press+or-toscrolltothedaysoftheweekthattheprogramwillrun.
11.PressDATE/TIME/NEXT.Thehourashes.
12.Press+or-toscrolltothedesiredhourorAMSunriseorPM
 Sunsetfortheevent.
13.Takeoneoftheseactions.
 IFYOUSELECTED... THEN...
 Aspecichour, Gotostep14
 SunriseorSunset, Gotostep16
14.PressDATE/TIME/NEXT.Theminutedigitashes.
15.Press+or-tosettheminutefortheevent.
16.IfyouwanttosetanotherON/OFFpair,repeatsteps1to16.
17.Ifyouarenishedsettingevents,pressandholdSET ON/OFF
EVENTSuntilthetimeofdayscreenappears.
 NOTE:IfyouleavethetimeridleinCalendarorEventsetting
 modesfor5minutes,thetimerwillautomaticallyswitchtoAUTO
 operatingmodeaftersavingyoursettings.
Daily Operation
Oncetheinitialsettingsarecompleted,followthisprocedure
toselecttheoperationmodeinthetimer.
1. PressSELECT FUNCTIONtoscrolltothedesiredoperation
 mode.SeeTable2forselectionofmodes.
 NOTE:Inorderforthetimeswitchtoruntheprogrammed
 events,theoperationmodemustbesettoAUTOorRDM.
Reviewing or Modifying an Event
Followthisproceduretomodifyanevent.
1. PressSET ON/OFF EVENTStoscrolltothedesiredevent.
2. PressDATE/TIME/NEXTtoselecttheeventsettingthat
 youwanttomodify.
3. Press+or-toadjustthesetting,thenpressDATE/TIME/
NEXTtosaveandadvancetothenextsetting.
4. Repeatstep3asneededforthisevent.
5. Ifyouwanttomodifyanotherevent,pressSET ON/OFF
EVENTStoscrolltothedesiredevent.

LIMITED ONE YEAR WARRANTY
If within the warranty period specified, this product fails due to a defect in material or workmanship,
Intermatic Incorporated will repair or replace it, at its sole option, free of charge. This warranty is extended
to the original purchaser only and is not transferable. This warranty does not apply to: (a) damage to
units caused by accident, dropping or abuse in handling, acts of God or any negligent use; (b) units
which have been subject to unauthorized repair, opened, taken apart or otherwise modified; (c) units not
used in accordance with instructions; (d) damages exceeding the cost of the product; (e) sealed lamps
and/or lamp bulbs, LED’s and batteries; (f) the finish on any portion of the product, such as surface and/
or weathering, as this is considered normal wear and tear; (g) transit damage, initial installation costs,
removal costs, or reinstallation costs.
INTERMATIC INCORPORATED WILL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO
YOU. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES. ALL
IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY AND THE
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY MODIFIED TO EXIST
ONLY AS CONTAINED IN THIS LIMITED WARRANTY, AND SHALL BE OF THE SAME DURATION AS
THE WARRANTY PERIOD STATED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON THE
DURATION OF AN IMPLIED WARRANTY, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
This warranty service is available by either (a) returning the product to the dealer from whom the unit was
purchased, or (b) completing a warranty claim on line at www.intermatic.com. This warranty is made by:
Intermatic Incorporated, Customer Service 7777 Winn Rd. Spring Grove, Illinois 60081-9698. For
warranty service go to: http://www.intermatic.com or call 815-675-7000.
INTERMATIC INCORPORATED, SPRING GROVE, ILLINOIS 60081-9698
158--01323
Troubleshooting
Symptom Possible Cause Solution
The timer is losing settings Low battery not holding memory Replace the battery. See Replacing the
Battery.
Output does not switch or output switches
at wrong time
Auto or RDM mode is not properly selected. Select the desired mode. See Daily
Operation.
There are extra or incorrect event settings. Press SET ON/OFF EVENTS to scroll
through the events to find the event that
needs to be changed or deleted.
See Reviewing or Modifying an Event.
Astro Events have seasonally adjusted
beyond fixed time.
Make sure the fixed timed events are not set
anywhere in the range of earliest to latest
sunrise and sunset.