Actuator Controller Model: PE140 Motorized Valve Control in Indoor/Outdoor Enclosure Model: P4043ME Control Mechanism only Input: 120 or 240 Volt 50/60 Hz Output: 24 VAC - 40 VA Max Installation and User Guide
DANGER • Do not permit small children to operate or use the Pool/Spa unless they are closely supervised at all times. • Test GROUND FAULT protection regularly. If it fails to reset, DO NOT USE THE POOL or SPA! Contact a qualified service technician. • Always disconnect electricity before servicing this Control or the equipment connected to it.
FUNCTION SELECTOR JUMPER SETTINGS: J1 MASTER SWITCH 1-2 Latching 2-3 Momentary Factory setting is 1-2 for all four Jumpers OPERATION Every time the position of the REMOTE SWITCH changes, the Motorized Valve(s) rotate to the opposite position. In addition, if connected, the heater thermostat setting changes from LOW to HIGH or HIGH to LOW. TROUBLE SHOOTING Problem Cause Solution 1. Nothing works. a. No power to transformer b. 120 Volt is connected to 240 Volt leads c.
LIMITED ONE YEAR WARRANTY If within the warranty period specified, this product fails due to a defect in material or workmanship, Intermatic Incorporated will repair or replace it, at its sole option, free of charge. This warranty is extended to the original household purchaser only and is not transferable.