User Manual

Three: Advanced Features 29
Providing a brighter solution.™
Including the PE953 Controller into a non-Multi-Wave (other
manufacturer’s) network.
The PE953 is a Z-Wave compliant device that may be included into
networkscreatedbyothermanufacturer’sZ-Wavecompliantcontrollers.
ToincludethePE953intoanothermanufacturer’scontrollernetwork:
1. Activatethe3rdpartycontroller’sControllerReplicationfunctionto
transmit network information to the PE953 according to that controller
manufacturer’sinstructions.
2. PressthedownbuttononthePE953todisplaytheCNTRLOPTION
screen.IfthescreenisnotdisplayingLEARNMODE,pressandhold
the <P/S> and <ENTER> buttons at the same time to put the device into
programming mode.
3. Press the <2>buttononthePE953todisplaytheCNTRLCOPYscreen.
4. Press the <2> button to receive network information on the PE953. The
PE953willdisplaythewordsWAITINGFORINCLUDE.
Upon completion, the PE953 will display SUCCESSFUL and will
automatically reboot. The PE953 will now function as a secondary remote
controllerinthe3rdparty’snetwork.
ToexcludethePE953fromanothermanufacturer’s3rdpartynetwork,
follow the instructions To Reset the PE953 Hand-Held Controller found on
page 42.
NOTE: Secondary remote controllers can be removed from any network
without any negative effects to the existing network by performing a
controller reset on the secondary remote controller.